|
Division ratios Last updated: 25 Sep 2017 |
If a gear is being cut with a dividing head, then the number of steps on the dividing head determine the numbers of teeth that can be cut on the gear. There are ways round this, e.g. rotary table, using the dividing head to skip steps. Presented below are the numbers which will divide into 720, although you can key in different numbers and press submit to get different results.
Number to divide into |
|
| Can be factored by: 2, 3, 4, 5, 6, 8, 9, 10, 12, 15, 16, 18, 20, 24, 30, 36, 40, 45, 48, 60, 72, 80, 90, 120, 144, 180, 240, 360 | |
These pages are maintained by Duncan
Munro. All content on this site is Copyright ©2002-2024 Duncan
Amplification.
Warning: These pages consist of images and descriptions of equipment
which can reach high temperatures creating hazardous and potentially dangerous
situations. These pages should not be taken as a step by step guide on how
to construct any items or carry out any particular procedure, nor should any
references to safety contained herein be taken to guarantee safety in all
situations.